Home/Mold Testing/Glen Burnie, MD

Mold testing

Mold Testing in Glen Burnie, MD

Samples taken in your home, analysed by an accredited laboratory. We do not sell remediation, so the report has nothing to sell you.

4.9 rating, over 4,000 reviews NAMRI-certified inspectors Serving Anne Arundel County

Schedule a mold test Call (703) 450-6398

How much does mold testing cost in Glen Burnie?

Four options, depending on how much of the home you need looked at. Not sure which one fits? Start with the thirty minute visit and a technician will tell you what is actually worth testing. Decide to test while they are there and the visit is written up as a Mold Plus.

No sampling

Mold Walk & Talk

"Something feels off and I do not know if testing is worth it."

$175

30 minutes on site

  • Time with an environmental technician
  • Moisture meter and thermal camera
  • Findings explained on the spot
  • Each additional 30 minutes $95
  • No samples or laboratory work

One area, tested

Mold Basic

"I can see it, or I know exactly where to look."

$345

One targeted area, 1 to 2 hours

  • Indoor sample plus outdoor comparison
  • Accredited laboratory analysis
  • Written laboratory report
  • Additional samples $95 each

One area, plus the source

Mold Plus

"There was a leak and I want to know where the water went."

$495

One targeted area, 1 to 2 hours

  • Everything in Mold Basic
  • Moisture and thermal evaluation of the area
  • Read Your Mold Report guide
  • Each additional area $50 plus its $95 sample

The whole home

Mold Advanced

"It could be anywhere, or it keeps coming back."

From $550

Priced by home size, 1 to 2 hours

  • Whole home moisture and thermal evaluation
  • Sampling in the areas that call for it
  • Read Your Mold Report guide
  • Post-remediation re-test $295 held 3 months

* Prices shown are for Virginia and Maryland. In Washington DC, Mold Basic is $425, Mold Plus is $575, and Mold Advanced starts at $630, with $80 added to every home-size tier. Mold Walk & Talk is $175 everywhere.

Where moisture can hide in Glen Burnie homes

Glen Burnie's Harundale neighborhood carries a distinction recorded in the Maryland State Archives chronology of Anne Arundel County: the Harundale Mall that developer James Rouse opened there on October 1, 1958, was the first enclosed shopping center in the state. Harundale's ranch and split-level houses sit around that early planned center, while other Glen Burnie neighborhoods took shape as separate waves of postwar and later development. That layered history means a house on one street can differ sharply from one two blocks over.

In Harundale, tell us whether your house dates to the original ranch or split-level construction near the old mall site, and describe any addition or converted garage. Ferndale's older, established streets may have a cellar or a basement finished at a later date, so identify which. In Fox Chase or Tanyard Springs, a townhouse or newer single-family home may center on one bathroom stack or window instead. Glen Gardens mixes apartments with detached homes near the highway, so include your unit type and floor when booking.

Local background: Maryland State Archives: Anne Arundel County chronology.

The historic water tower in Glen Burnie

01

Converted garages near the old mall

A ranch or split-level near Harundale's original center sometimes gained a converted garage or enclosed carport used as living space. Describe when that conversion happened and whether the floor sits below the surrounding grade, since that affects how the space handles moisture.

02

Ferndale cellars behind newer flooring

In Ferndale's older houses, a cellar may have been finished with new flooring or wall covering that conceals the original surface. Describe what was installed and when, and note whether any water history is known from before the work was done.

03

Party walls in newer Fox Chase rows

Townhouses built as attached rows share a wall and sometimes a roof section with the unit next door. Identify which side of the party wall the concern involves, and describe whether your neighbor has reported anything similar, since a shared structure may need coordinated access.

Where we test in Glen Burnie, and what to tell us

  • Harundale, Ferndale

    In these established neighborhoods, identify whether the house is an original ranch, split-level or a later infill build, and describe any basement finished after the fact. Bring details of roof or foundation repairs you know about.

  • Fox Chase, Tanyard Springs

    For a townhouse or a newer single-family home here, note which wall is shared, if any, and describe access to a crawlspace or slab utility closet. Mention any builder warranty work completed.

  • Glen Gardens

    This area mixes apartments with detached homes near the commercial corridor. Identify your building and unit if applicable, and describe the roofline and any shared wall or plumbing chase relevant to the concern.

We test. We never sell you the fix.

No version of your result is worth more to us than another one. If the report says you need work, you choose the remediator. A separate post-remediation assessment can document conditions after the work within its agreed scope.

Before you book in Maryland

For a Maryland property, define the question before ordering samples: a particular stain, persistent odor, water event or follow-up after repairs. Keep dated observations and laboratory findings with the repair history. A report does not determine health risks, insurance coverage or legal responsibility. Montgomery County also publishes separate radon requirements for covered home sales; confirm which rules apply to your transaction.

EPA sampling guidance; Montgomery County radon guidance. Current as of September 2026. General information, not legal advice.

Mold testing in Glen Burnie, answered straight

Which package fits a Harundale ranch with a converted garage?

Describe when the garage was enclosed and whether it is used as a bedroom, office or storage. Walk & Talk is a consultation without laboratory samples, Mold Basic tests a single targeted area, and Mold Plus adds a moisture and thermal evaluation of that area. The office can help decide whether the converted space should be the sole focus.

Is Ferndale's older housing stock more likely to need testing?

Age alone does not indicate a concern. Describe any specific observation, such as a persistent odor, a visible stain or a known water event, and mention any recent renovation. The visit is scoped to what you can describe about your individual property, not to the neighborhood's age generally.

Do Fox Chase and Tanyard Springs townhouses need different testing?

The approach depends on the individual unit rather than which of the two communities it is in. Describe whether walls are shared, where the concern is located, and any builder or association records you have. The technician will scope the visit to your specific townhouse and its access points.

Can Glen Gardens apartment and commercial spaces share one visit?

Residential and commercial spaces are generally scoped as separate visits, even in a mixed-use area. Describe your unit type and any connection to a neighboring commercial space, such as shared ventilation or plumbing. The office can advise on whether more than one appointment is needed.

Book a mold test in Glen Burnie

Real availability on the next screen. No call back required.

Schedule a mold test Request a price

NextDay Inspect
46179 Westlake Dr, Ste 200, Sterling, VA 20165
(703) 450-6398

Call Schedule