Home/Mold Testing/Prince George's County, MD
Mold testing
Mold Testing in Prince George's County, MD
Samples taken in your home, analysed by an accredited laboratory. We do not sell remediation, so the report has nothing to sell you.
4.9 rating, over 4,000 reviews NAMRI-certified inspectors Serving all of Prince George's County
Schedule a mold test Call (703) 450-6398 Find your community
Where we test in Prince George's County
Nine communities across the county have a page of their own with local detail. The packages, the prices and the laboratory are the same in every one of them, so you can also book straight from here.
Inside the Beltway, near the District line
- Chillum
Brick duplexes and postwar garden apartments sit on tight lots just inside the District line, built up over several different decades.
- Landover
Older farmhouses and brick foursquares sit near postwar duplexes and garden apartments crowded against newer commercial development along the Beltway.
- Suitland
Frame cottages from the original crossroads sit near brick garden apartments built up around the federal government's midcentury expansion.
Route 1 and the College Park corridor
- College Park
Campus rentals near the university share streets with older bungalows and later brick houses built during the college town's biggest growth years.
- Greenbelt
Cooperative rowhouses from the town's earliest section sit near garden apartments and newer condominium towers closer to the Metro station.
Bowie and Laurel, to the north and east
South county toward Clinton and Fort Washington
- Clinton
Older farmhouses on well and septic near the original crossroads sit close to newer subdivisions built out along Woodyard Road.
- Fort Washington
Walkout lower levels above the golf course sit near older farmhouses close to the creek and newer construction closer to the Beltway.
Bowie, College Park, Greenbelt and Laurel are incorporated cities inside the county; Chillum, Clinton, Fort Washington, Landover and Suitland are unincorporated communities known by their postal names. The same team, packages and prices cover all of them.
How much does mold testing cost in Prince George's County?
Four options, depending on how much of the home you need looked at. Not sure which one fits? Start with the thirty minute visit and a technician will tell you what is actually worth testing. Decide to test while they are there and the visit is written up as a Mold Plus.
No sampling
Mold Walk & Talk
"Something feels off and I do not know if testing is worth it."
$175
30 minutes on site
- Time with an environmental technician
- Moisture meter and thermal camera
- Findings explained on the spot
- Each additional 30 minutes $95
- No samples or laboratory work
One area, tested
Mold Basic
"I can see it, or I know exactly where to look."
$345
One targeted area, 1 to 2 hours
- Indoor sample plus outdoor comparison
- Accredited laboratory analysis
- Written laboratory report
- Additional samples $95 each
One area, plus the source
Mold Plus
"There was a leak and I want to know where the water went."
$495
One targeted area, 1 to 2 hours
- Everything in Mold Basic
- Moisture and thermal evaluation of the area
- Read Your Mold Report guide
- Each additional area $50 plus its $95 sample
The whole home
Mold Advanced
"It could be anywhere, or it keeps coming back."
From $550
Priced by home size, 1 to 2 hours
- Whole home moisture and thermal evaluation
- Sampling in the areas that call for it
- Read Your Mold Report guide
- Post-remediation re-test $295 held 3 months
* Prices shown are for Virginia and Maryland. In Washington DC, Mold Basic is $425, Mold Plus is $575, and Mold Advanced starts at $630. Mold Walk & Talk is $175 everywhere.
Where moisture can hide in Prince George's County homes
A Prince George's County mold visit should begin with the room and water history, whether the home is in Bowie, Landover, College Park, or another community. Describe visible growth, staining, a musty odor, and any leak or flooding you know about. A neighborhood or construction date alone does not explain what happened inside one property.
Tell us which floor and unit are affected, what has been dried or repaired, and which spaces are accessible. If the concern involves a shared wall, window well, or separate area, mention it before choosing a package. The visit can document conditions within the agreed scope; selected samples do not guarantee that hidden rooms are mold-free.
Mold guidance: U.S. EPA on when mold sampling is useful.
01
Water entry near a lower level
For a Prince George's County basement or window well, report when water entered, the wall or floor affected, and any drainage or drying work. The property's observed history is more useful than a soil label.
02
Apartments and shared walls
In a Greenbelt, Suitland, or College Park apartment, identify the affected unit and any known plumbing leak. Neighboring spaces and concealed cavities require separate access and an agreed scope.
03
Bathrooms and roof leaks
Describe visible growth, staining, or odor near a fixture or ceiling and any repairs already made. EPA guidance says sampling is often unnecessary when mold is visible; discuss whether a sample would answer a specific question.
We only perform testing, not remediation.
We do not remove mold, so we have nothing to gain from your results. If your report shows a problem, you choose who fixes it. Once the work is done, we can test again and tell you what we find.
Before you book mold testing in Maryland
Tell us which room or unit is affected, what you can see or smell, and the history of any water entry, drying or repairs. Ask which package includes the evaluation or laboratory samples needed for your question. If you need a report for a sale or repair deadline, confirm appointment options and expected laboratory turnaround with the office before relying on that date.
Mold testing near Prince George's County
Nearby
Mold testing in Prince George's County, answered straight
Do you test in every community across Prince George's County?
Yes. The same team and pricing structure book across the whole county, from the communities inside the Beltway to Bowie, Laurel and the southern reach toward Clinton and Fort Washington. Each community page adds detail specific to that place, and a booking can start from any of them.
What should I share before a Prince George's County mold visit?
Give the full address, affected room or unit, visible conditions or odor, and the history of any water entry, drying, or repair. Mention a shared wall or inaccessible space so the office can confirm what the selected visit includes.
Does visible mold always need laboratory testing?
No. EPA guidance says sampling is often unnecessary when mold growth is already visible. The moisture source and affected area still need attention. If sampling would help answer a defined question, discuss its purpose and limits with the technician.
How does scheduling work for a house in Prince George's County?
Check the booking calendar for appointment options and include any contract deadline in the notes. Confirm expected laboratory timing with the office before relying on it for a sale. An appointment opening does not guarantee a laboratory completion date, and a consultation package does not include lab work.
Book a mold test in Prince George's County
Real availability on the next screen. No call back required.
Schedule a mold test Request a price
NextDay Inspect
46179 Westlake Dr, Ste 200, Sterling, VA 20165
(703) 450-6398